• Ozone Reo V5

Ozone Reo V5
Ozone Reo V5
: $1,780.00
Quantity:


Since its introduction six years ago the Reo has been the reference for pure wave riding, setting the benchmark in performance and feeling.


The Reo's unique flying characteristics allow you to maximize the potential of every wave, giving you the freedom to smash the lip, clear a section, carve turns or snap in the pocket. Fast direct handling and perfect drift combined with amazing de-power and the ability to absorb gusts means you can choose exactly where you want to place yourself on a wave to make that next move.


The Reo V5 features our innovative Variable Bridle Geometry (VBG). The new bridle settings extend the kites operating range, bringing another level of versatility to this already outstanding design.


The Reo V5 features our new stronger and lighter strut construction. The wingtip shape has also been refined with our new tapered tip and slim line deflector. We understand the importance of aerodynamics and weight saving especially on a kite where drift is imperative, so every detail has been refined to be as light as possible while maintaining the strength and integrity you expect from an Ozone product.


We've maintained the quick and easy re-launch - by turning the bar or using the Re-launch Balls on the leader lines, the Reo V5 will roll over and take off from the water in an instant. This is especially helpful if you're stuck in the impact zone and need to get out of there fast!


Variable Bridle Geometry settings

  • Classic - The way we know and love the Reo - a balanced and refined feeling from the kite with good forward speed perfect for most conditions, and excelling in cross to cross-off winds. The kite can sit further to the edge of the wind window when depowered, drifting as you ride down the line. The Classic setting is the upper knot on the Variable Bridle Geometry Pigtails (factory setting).
  • Onshore - A new feeling and characteristics - the kite sits a little further back in the wind window and tackles onshore conditions with ease. Increased bar pressure improves feeling from the kite when a wave is pushing with the wind. If you prefer a slightly heavier feel this could be the setting for you. This setting is the lower knot on the Variable Bridle Geometry Pigtails.


Design and Performance Features:

  • Exceptional Ozone Factory construction – World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
  • Designed with OZ-CAD – The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical inflatable and foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
  • Teijin TechnoForce D2 and Teijin Dacron – Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.
  • 4-line Pulley-less System – NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.
  • Two Variable Bridle Geogetry Settings – The Reo V5 features our innovative Variable Bridle Geometry (VBG). The new bridle settings extend the kites operating range, bringing another level of versatility to this already outstanding design.
  • High Volume inflate/deflate valve – A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.
  • Back-line trimming options – Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.
  • Fool-proof line connectors – Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.
  • Tuned Bridle Geometry – We work extensively during our R&D process to develop the size range to feel in tune with each other. Every kite has a unique bridle layout, individually tested and fine-tuned to maximize the feeling and performance.
  • Anti-snag line deflectors – The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.
  • Anti-flap Soft Battens – Soft Battens strategically positioned along the Trailing Edge provide canopy support and reduce flutter, enhancing kite feedback to the rider and also reducing canopy material wear.
  • Direct Connect Struts – Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension.
  • Unique Bladder Construction – Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.
  • Double Stitched Folded Seams – Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.
  • Internal Reinforcements – What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.
  • Load Distribution Panels – Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.
  • Low-profile Aerodynamic Scuff Pads – Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.
  • Reinforced Leading Edge and Struts – The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.
  • Reinforced Trailing Edge – Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.
Package Contents
Kite Only
Kite
Technical bag
Repair pack
Manual
Stickers, keyring
Complete
All items from Kite Only package
Bar and lines
Leash